Posts

Showing posts from February, 2023

Day 5 - big pieces of clay

Image
The vase I plan on making is somewhat bigger than it looks in a cabinet in the museum. I made a cardboard model of it to act as a template and get an idea of where to place the decoration. I then spent the rest of the session trying to make a large enough sheet of clay for it. Its too big for the roller. In the end, I had to make two slabs and I'll join them next week. When I was doing this, I wanted to make something that was a challenge but achievable. I just hope it doesn't all fall apart in the kiln.

Day 4 - planning and stuff

Image
This week was fairly easy on the techniques. The first job was to try and the sprig mold I made last week. It turns out I left parts of the mold undercut so the plaster was a bit damaged when it was taken out. I then had to cut away the remaining undercuts on the plaster before I could try and use it. The leaves came out ok(ish) in the end. If I was doing it again, apart from being more careful with the undercutting, I'd do the leaves and stem separately. It wasn't really possible to get them all out of the mold in one go. One lightly damaged mold Leaves from the mold The second job was putting some oxides on  the clays tiles that had now been fired. As I had no real clue how these would turn it, it was a question of painting on the oxides, wiping some off with a sponge and hoping for the best. Finally the interesting bit was starting to plan how I'll use some of these techniques in a piece. So far I've decided I like the gold-on-grey on a piece by Evelyn De Morgan  and...

Day 3 - Slip Transfers and Sprig Molds

Image
 The first of this week's efforts was slip printing. You paint layers of coloured slip onto tissue paper and then slap the paper onto a slab of wet clay. After a bit of pressing and praying, you can peel off the paper to reveal your masterpiece. Jason Bige Burnett makes this look easy. I'm not sure if I'm inspired by this or depressed. Either way, for my first attempt I tried a false-coloured teasel. Teasels are all a bit brown so I thought I would brighten it up a bit. I seem to have made some weird strawberry-teasel hyrbid. The second attempt came out better and I can start to see how the technique could be effective. A teaselberry! Attempt two The second technique was making a sprig mold. We had to create a model of what we wanted and take a plaster cast to produce a negative. From that we can copies of the original clay model. I used some mahonia leaves to cut out an outlines of the leaves in clay and used that to make the mold. It looked as much like holly as mahonia ...